![Honda 08V03-T7S-100 Installation Instructions Manual Download Page 5](http://html1.mh-extra.com/html/honda/08v03-t7s-100/08v03-t7s-100_installation-instructions-manual_2155620005.webp)
© 2015 American Honda Motor Co., Inc. – All Rights Reserved.
AII01797-23 (1504)
5 of 14
7.
Remove the driver’s sunvisor holder:
•
Wrap tape around the tip of flat-tip screwdriver.
•
Release three retaining tabs on the driver’s
sunvisor holder.
•
While holding down the driver’s sunvisor holder
as shown, use a flat-tip screwdriver wrapped
with a tape to remove the driver’s sunvisor
holder (three retaining tabs).
QC22003BJ
DRIVER’S
SUNVISOR HOLDER
FLAT-TIP
SCREWDRIVER
TAPE
3 RETAINING
TABS
(Push.)
QC22004AJ
3 RETAINING
TABS
(Push.)
Hold down.
DRIVER’S
SUNVISOR HOLDER
FLAT-TIP
SCREWDRIVER
If the vehicle is equipped with the side curtain airbags,
continue with step 8. If not, go to step 11.
With side curtain airbags
8.
Remove the driver’s A-pillar trim:
•
Pull away the door opening seal from the driver’s
A-pillar trim.
•
Pull out on the driver’s A-pillar trim to release
three clips.
QD40302BJ
Pull
the clip.
2 CLIPS
DRIVER’S
A-PILLAR
TRIM
DRIVER’S A-PILLAR
DOOR
OPENING
SEAL
(Pull away.)
DRIVER’S
A-PILLAR TRIM
SECTION VIEW