© 2015 American Honda Motor Co., Inc. – All Rights Reserved.
AII01797-23 (1504)
13 of 14
35. Secure the automatic day/night mirror harness to the
vehicle harness with two wire ties.
36. Check that all wire harnesses are routed properly
and all connectors are plugged in.
37. Check the overlap between the headliner and the
driver’s A-pillar trim. Refer to the Service Manual. If
necessary, adjust the overlap.
38. Reinstall all removed parts.
39. Reconnect the negative cable to the battery.
40. Press and hold the radio power button for two
seconds to restore the radio and navi (if equipped)
system functions.
41. Reset the clock.
42. Restore the systems back to normal operation as
described in the Service Manual if necessary.
43. Perform the “CHECK THE OPERATION OF THE
AUTOMATIC DAY/NIGHT MIRROR.”
44. Adjust the zone and calibrate as required.
QD42319AJ
AUTOMATIC DAY/NIGHT
MIRROR HARNESS
VEHICLE
HARNESS
2 WIRE TIES
CHECK THE OPERATION OF THE AUTOMATIC DAY/
NIGHT MIRROR
1.
Turn the engine switch to ON, but do not start the
engine.
2.
Turn on the switch. Check that the LED lights.
030406AB
SWITCH
(Turn on.)
LED
AUTOMATIC DAY/NIGHT MIRROR
AUTOMATIC DAY/NIGHT MIRROR
