08B28-SMR-6001-96
30 / 32
46. Mark the two dimension positions with a felt-tip
pen on the front console.
6706190Y
15 mm from the
rounding end
15 mm
FRONT CONSOLE
MARK
FELT-TIP PEN
10 mm
from the
rounding
end
FRONT CONSOLE
47. Prick the two marked positions with a pushpin.
Use an electric drill to drill holes with 3 mm
diameter at the two marked positions, and then
widen the holes with a 15 mm hole saw.
48. Join the two 15 mm holes by cutting as shown.
•
Remove any burr.
6706200Y
ELECTRIC DRILL
(3 mm drill bit)
HOLE SAW
(15 mm)
FRONT
CONSOLE
FRONT
CONSOLE
PUSHPIN
UTILITY KNIFE
Mark made in
step 46.
