08B28-SMR-6001-96
26 / 32
iPod
®
is a trademark of Apple
Computer, Inc., registered in the U.S.
and other countries.
30. Clean the urethane attachment surface with
contact cleaner. Attach one piece of urethane
to the adapter unit.
31. Clean the cushion tape attachment surface
with contact cleaner. Route the adapter unit
harness and the iPod
®
harness as shown and
secure them with three cushion tapes to the
glove box. (Perform the work from step 37.)
6706120Y
CUSHION
TAPES (3)
ADAPTER
UNIT
HARNESS
URETHANE
iPod
®
HARNESS
GLOVE BOX
<Car with a navigation system>
32. Mark the two dimension positions with a felt-tip
pen on the glove box.
6706021Y
MARKS (2)
GLOVE BOX
FELT-TIP PEN
GLOVE BOX
MARK
45 mm
35 mm
33. Prick the two marked positions with a pushpin.
Use an electric drill to drill holes with 3 mm
diameter at the two marked positions, and then
widen the holes with 6 mm drill bits.
•
Remove any burr.
6706031Y
PUSHPIN
ELECTRIC
DRILL
(3 mm
6 mm drill bit)
Marks made in step 32.
GLOVE BOX
