© 2005 American Honda Motor Co., Inc. - All Rights Reserved.
AII 30200 (0508)
9 of 13
With Player:
•
Wrap the BUS cable with two EPT sealers
starting at the end of the tube.
•
Route the BUS cable under the player base-
bracket. Secure the BUS cable to the vehicle
harness with two wire ties, so that the distance
between the BUS cable connector end and the
upper wire tie is 200 mm.
•
Apply masking tape to the center panel in the
area shown.
2321042K
EPT SEALER
BUS CABLE
200 mm
VEHICLE
HARNESS
WIRE TIE
BUS CABLE
END OF
TUBE
MASKING
TAPE
PLAYER
BASE-BRACKET
Routing the BUS Cable
25. Plug in the BUS cable.
Without Player:
•
At the center console, clean the vehicle frame
with isopropyl alcohol where the cushion tape
will attach. Using scissors, cut the cushion
tape in half, and attach one half of the cushion
tape to the edge of the vehicle frame.
•
Wrap the BUS cable with two EPT sealers
starting at the end of the tube. Plug the BUS
cable 14-pin connector into the vehicle 14-pin
connector.
•
Route the BUS cable along the vehicle
harness, then secure it to the vehicle harness
with two wire ties.
2222052K
CUSHION TAPE
(Cut in half.)
VEHICLE 14-PIN
CONNECTOR
VEHICLE
FRAME
EPT SEALER
WIRE TIE
VEHICLE
HARNESS
BUS CABLE
BUS
CABLE
END OF TUBE
14-PIN
CONNECTOR
