4 of 13
AII 30200(0508)
© 2005 American Honda Motor Co., Inc. - All Rights Reserved.
•
Remove the four 6 mm flange nuts that fasten
the player and pocket. Remove the player and
pocket by pulling it out toward you, and
unplugging the player BUS cable connector.
8.
Remove the right and left inner covers (one hook
and one clip for each cover).
•
Go to step 8.
7.
Remove the pocket:
•
Apply masking tape to the edge of the center
panel.
•
Remove the two self-tapping screws.
•
Push in on the bottom of the lid, then pull out
on the top by inserting the end of hook tool
between the pocket and center panel, and
pulling it to out toward you to release the two
retaining clips.
2206073K
RETAINING
CLIP (2)
HOOK TOOL
CENTER
PANEL
LID
SELF-TAPPING
SCREW
(Reuse.)
MASKING
TAPE
Push.
2321030K
6 mm
FLANGE
NUT
PLAYER
PLAYER
BUS CABLE
CONNECTOR
2226020K
CENTER CONSOLE
BOX MAT
SCREW
(Reuse.)
CENTER
CONSOLE
LID
RETAINING
TABS (4)
CENTER
CONSOLE
SELF-TAPPING
SCREW (Reuse.)
2226010K
CLIP
LEFT INNER
COVER
HOOK
POCKET
OPENING
RIGHT
INNER
COVER
9.
Open the center console lid, and remove the
center console box mat. Remove the center
console by removing the four self-tapping screws
and two screws and releasing the four retaining
tabs.
Without Accessory Socket:
