53
4.Grass deflector replacement
Install the grass deflector in the proper position securely to protect you
from the debris that are thrown from a wheeling cutting attachment.
CAUTION:
Wear heavy gloves to protect your hands, when working around the
cutting attachment.
Installation position of grass deflector
1.Place the grass deflector in a position that allows it to touch the
gearbox.
2.Remove the grass deflector mounting bolts, and then remove the
grass deflector.
3.Place the protector holder on new grass deflector and align the bolt
holes.
4.Keep the grass deflector position and direction same as below.
Please avoid the distance between blade and deflector as
recommend position to not touch or hit each other.
5.Tighten the bolts securely. Torque the bolts to:
5.9 – 7.8 N
∙
m (0.60 – 0.80 kgf
∙
m)
GRASS DEFLECTOR
GRASS DEFLECTOR
MOUNTING BOLTS (2)
PROTECTOR HOLDER
From the end of
gear case to
deflector plate:
47mm
42VR26001_Eng.book Page 53 Tuesday, May 23, 2017 4:37 PM
