Indoor/Outdoor
Utility Shower Kit
03-20-2020
PACKAGE AND HARDWARE CONTENTS
MODEL
3070-250-CH-B-WS - Chrome
Showerhead flow rate in this unit meets Government standards of
A112.18.1M – 1.8 GPM (6.8 LPM) max at 80 PSI
Homewerks Worldwide, LLC • Lake Bluff, IL 60044 • www.HomewerksWW.com
PREPARATION
SAFETY INFORMATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product. Contact
customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): Adjustable Wrench, Slip
Joint Pliers, Pipe Wrench, Phillips Screwdriver, Thread Seal Tape or Pipe
Thread Compound, and Supply Lines.
Installation may vary depending on how the previous shower was
installed. Supplies necessary for the installation of the shower are not
all included; however, they are available wherever plumbing supplies
are sold.
Prior to beginning installation, turn off the hot and cold water lines, then
turn on the old shower to release built-up pressure. When installing the
new faucet, hand tighten the connector nuts.
DO NOT OVERTIGHTEN.
Connections that are too tight will reduce the integrity of the system.
Please read and understand this entire manual before attempting to
assemble, operate or install the product.
WARNING
• Protect your eyes with safety glasses when cutting or soldering water
supply lines.
CAUTION
• If you solder the joints during installation of the shower, the seats,
cartridges, and washers must be removed before using a flame
or the warranty will be voided on these parts.
• Cover the sink drain to avoid losing parts.
PART
DESCRIPTION
QUANTITY
A
Showerhead
1
B
Shower arm
1
C
Soap dish
1
D
Mounting screws
2
E
Faucet body
1
Questions, problems, missing parts?
Before returning to your retailer, call our customer service department at 1-877-319-3757,
7:30 a.m. - 4:30 p.m., CST, Monday - Friday.
A
B
C
E
D
