English
www.homeright.com
4
Quick Start Reference Guide
This is only a quick reference. Read the entire instruction manual prior to using the product.
Read all warnings and safety instructions in the instruction manual before use.
1
2
3
NOTE: Sprayer requires lubrication before each
use to work properly. See lubrication section on
page 14 for details.
Mix your material thoroughly. For best results
it is recommended to thin paint 5-8%. Remove
and fill container with material. Use a filter to
strain material if it is old, as it may be chunky
and clog the sprayer.
Tightly attach pick-up tube to the forward-
most port of the cylinder housing. Attach
the container filled with your material to the
sprayer and plug into outlet.
4
5
6
7
Set flow to maximum by turning the control
knob fully counterclockwise.
Adjust the spray pattern by turning the knob
back in a clockwise direction until you have
the spray pattern you want. See page 9 for
information on proper spray pattern.
When finished spraying, unplug sprayer.
Remove container and empty contents. Rinse
container out completely.
Spray your surface, keeping the sprayer level
and 10" to 12" from surface. Use a sweeping
and overlapping motion for best overall coverage.
8
Fill sprayer with cleaning solution and engage
trigger until solution comes through nozzle. See
page 12 for information on latex and oil clean up
suggestions.
Remove parts. Clean and dry according to
instructions on page 12. Lubricate sprayer
before storing with lightweight oil (included), or
use WD40
®
, 3-in-One
®
oil, or similar product.
9
C820425D.f_MAN_Pro50-55_EN-FR-ES.indd 4
8/15/11 10:41 AM
