-3-
ALFA IN a.s. ©
www.alfain.eu
1. INTRODUCTION
Congratulations on your new ALFA IN product. We are proud to have you as
our customer and will strive to provide you with the best service and reliability
in the industry.
This operating manual has been designed to instruct you on the correct use
and operation of your ALFA IN product. Your satisfaction with this product and
its safe operation is our ultimate concern. Therefore please take the time to
read the entire manual, especially the safety precautions. They will help you to
avoid potential hazards that may exist when working with this product.
Read and understand this entire manual and your employer’s safety practices
before installing, operating, or servicing the equipment. While the information
contained in this manual represents the manufacturer's best judgement, the
manufacturer assumes no liability for its use.
Welding machine HOMER MG-160 of our private brand HOMER tools is aimed
for MIG/MAG welding.
The machine can weld various types of joints (butt, single-sided, double-sided,
fillet, lap, etc.) using wire diameter from 0.6 to 0.8 mm, respectively. 1.0 mm
(flux cored wire) of different metals and alloys (carbon and alloy steels,
aluminium alloys, etc.). HOMER MG-160 is especially designed for bodywork
operations or maintenance work. Very good welding can be achieved under a
protective atmosphere of CO2. The machine welds very well by means of using
high-quality self-shielding wire (no gas cylinder and pressure reducer needed).
We reserve the law of adjustments and changes in case of printing errors,
change of technical paramaters, accessories etc. without previous notice.
These changes may not be reflected in the manuals for use in paper or
electronic form.
