P11
Remove the power lead cover plate at the rear of the machine using a #2
phillips head screwdriver and plug in the power cable. Refit the metal
cover.
Put the glass back in the machine, close the DMD speaker panel and latch
it. Refit the translite and put the key back inside the front door on the
hook provided.
Refit the lockdown bar – again, this may take a lot of pressure and pushing
down firmly on the top of the bar may be required. Put the coin box in
place and close the door.
The main power on/off switch is fitted under the right hand side next to
the front right leg.
Congratulations, your new Thunderbirds Pinball machine is ready to use.
Rev 1.3 December 2018
© Homepin Ltd (HK)
--oo00oo--
