P5
Carefully cut and remove the plastic wrap holding the backbox.
Slowly fold the backbox up to its vertical position. Take note of the three
tubes that carry the wires. The two thicker ones (indicated by red arrows)
are attached to the headbox and will push into the bottom cabinet as you
fold the headbox up while the thin one (in yellow) is attached to the main
body of the machine (bottom) and so you can help it into the headbox.
Make sure these tubes do not get jammed between the headbox and the
main body of the machine. The headbox will sit in the upright position
while you prepare to bolt it in place.
