11
BEEP
AUDIBLE BEEP (OPTIONAL)
DN UP P S
1
2
3
132A2940
Flash
x 2
AUDIBLE
BEEP
Flash x 2
BEEP
DN
DN
UP
UP
P
P
S
S
1
1
2
2
3
3
The HERDO1 has been factory set for Audible
“BEEP”.
The Audible beep can be turned OFF by using the
following method.
• Start with the door fully CLOSED.
• Press and Hold both “S” and “DN” buttons
for 3 seconds
• The Courtesy light will flash “TWICE”.
Release Buttons.
To turn the audible beep back ON, simply repeat the
above process.
17
Door Fully Closed
fig.1
fig.2
fig.3
BEEP
DN
DN
UP
UP
P
P
S
S
1
1
2
2
3
3
Flash
x 1
BEEP
DN
DN
UP
UP
P
P
S
S
1
1
2
2
3
3
Flash
x 2
This is an adjustable, second stop position suitable for
ventilation, pedestrian or pet access, programmed to the
Remote Control.
NOTE: Wireless Wall buttons will not operate this feature.
To Activate the Partial Opening Feature:
1.Start with the door fully
CLOSED
(figure 1). Drive the
opener UP and stop at the position required for
PET
access.
2.Enter PET activation mode by pressing the
P
and
UP
buttons together for 3 seconds (figure 2). Release when the
Courtesy light flashes once.
3.Press the Remote Control button that you have allocated for
this feature (figure 3). Do not use the button already
allocated for normal operation. The Courtesy light will flash
when the code is accepted.
The remote will now operate to and from the “programmed” and
the “fully closed position”. Outside this range the remote will
operate as normal.
To Deactivate the Partial Opening Feature:
1.Start with the door fully
CLOSED.
2.Enter PET Activation mode by pressing the
P
and
UP
buttons together for 3 seconds (figure 2). The Courtesy light
will flash twice, indicating that deactivation has occurred.
PARTIAL OPENING FEATURE (PET)
18
