6
NEW CONSTRUCTION INSTALLATION INSTRUCTIONS
BEFORE INSTALLATION
WARNING: RISK OF ELECTRIC SHOCK.
Ensure the
electricity to the wires you are working on is shut off.
Either remove the fuse or turn off the circuit breaker
before removing the existing bath fan or installing the
new one.
1. Place the fan housing (A) next to a ceiling joist or wall stud. The
fan housing (Å) should be level and perpendicular to the joist
or stud. Allow for thickness of ceiling board or drywall used in
your application. DO NOT flush mount to joist. Bottom of the
fan housing should be flush with ceiling board or drywall.
1
2
A
1
2. Before mounting the fan housing (A) to the joist or wall stud,
remove the plastic duct connector for easier access to the
mounting hole on the fan housing (A).
Remove the duct connector by inserting a flat head screw
driver between the plastic and metal of the fan housing (A),
then GENTLY pry the duct connector off.
A
Duct connector
2
3. Mount fan housing (A) to the joist or stud using wood
screws (AA) where indicated by arrows outside fan
housing (A).
A
Hardware Used
AA
Wood screws
x 2
3
A
A
AA
4. Reattach duct connector by hooking the duct connector on
one side of the metal flange on the fan housing (A) and then
pressing down on the other side to snap the duct connector
into place. Ensure that all four metal flanges on the fan
housing (A) are inside the plastic duct connector.
Duct connector
A
4
HomewerksWW.com