![background image](http://html.mh-extra.com/html/homenetwerks/7130-08-bt/7130-08-bt_user-manual_2153908009.webp)
9
2.
Measure the opening to ensure it is large
enough to accommodate the new fan housing
+/ +X< ^ X /
3.
If this fan is not replacing an old fan, be sure
X< ^ X " * $
* $" +/
Place the fan housing next to a ceiling joist or
wall stud. The fan housing should be level and
perpendicular to the joist or stud. Allow for thick-
ness of ceiling board used in your application.
\ Z\` $ ) { * $ *
$" $& ' $ $ &" '
5.
Before mounting the fan housing to the joist,
remove the plastic duct connector for easier
access to the mounting hole on the fan housing.
_4 $ ': "
head screw driver between the plastic and metal
of the fan housing, then GENTLY pry the duct
connector off.
2
3
9.4"
9.4"
X
7-1/2 in.
EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS
1
2
4
www.homewerksww.com
5