27
7 Assignment of button inputs
and actuator channels
All channels of the device are configured as button
inputs in delivery status. You can teach the inputs
for any actuator channels on the bus.
7.1 Teaching button inputs to actuator
channels
Please read this section completely before
starting with any configuring!
The button inputs are not assigned to any
actuator channels in factory status (not the
actuator channels of the device on which they are
located either)
Assignment of button inputs to actuator channels
• Press the programming button of the actuator
(channel) to be assigned on the module until
the channel LED flashes slowly (after approx.
3 seconds). The module is now in teach mode.
• Now, actuate a button on the button input (on
the same module or any other module on the
