31
Hazard information
qualified electricians (to VDE 0100) are permitted
to carry out work on the 230 V mains. Applicable
accident prevention regulations must be
complied with whilst such work is being carried
out. To avoid electric shocks from the device,
please disconnect the mains voltage (trip the
miniature circuit-breaker). Non-compliance with
the installation instructions can cause fire or
introduce other hazards.
Mains supply and SELV/PELV power circuits may
not be connected together (in combination) to
the different switching outputs.
When connecting to the device terminals, take
the permissible cables and cable cross sections
into account.
Connected loads require sufficient insulation.
Exceeding this capacity could lead to the
destruction of the device, fires or electric shocks.
Please take the technical data (in particular the
maximum permissible switching capacity of the
load circuits and the type of load to be connected)
into account before connecting a load. Do not
exceed the capacity specified for the device.
