HomeMatic HmIP-DLS, Mounting Instruction And Operating Manual

Page: 39 / 51

39
Start-up
5.2 Installation requirements
Installation is easy by simply inserting the available key
into the door lock sensor. Because of its universal de-
sign, the door lock sensor fits in all common key types
for cylinder locks. The door lock sensor is also suited for
multi-point locking.
Only use lock cylinders with an emergency and
hazard functionality. These can be locked and un-
locked from the outside using a second key
whether or not a key is inserted on the inside.
You can print out a prepared key template in the original size
and compare it to your key in order to check whether or
not your key is the right size (s. figure 4). You will find this
template in the download area of www.homematic-ip.com.
The key may not be thicker than 2.5 mm.
5.3 Installation
Please read this entire section before starting to
mount the device.
Proceed as follows to install the door lock sensor:
• Loosen the screws (C) to open the key clamp (A)
so that you can slide your key in easily (s. figure 5).