51
Start-up
1
2
• After a short time, the newly taught-in device will appear
in the inbox of your software interface. The button “Inbox
(x new devices)” indicates how many new devices have
been taught-in successfully.
• Close the battery compartment
(G)
with the battery com-
partment cover
(B)
and insert the motion detector into the
mounted wall/ceiling bracket
(A)
.
• If required, you can teach-in additional devices by repeat-
ing the steps described above for each device.
•
Now configure the newly taught-in devices in the inbox as
described in the next section (“Configuring newly taught-
in devices”).
6.5 Configuring newly taught-in devices
Once you have taught-in your motion detector to the Homemat-
ic Central Control Unit, it will be moved to the inbox. Here, you
must configure the device and its associated channels in order
to make them available for operating and configuration tasks.
Give the device a name and assign the device/channels to a
room. You can also make individual parameter settings.