EN
29
– divide products for processing into chunks to fit the feed chute in the cover (2). Elongated
(i.e. carrots) or fibrous products (e.g. pineapple) should be divided into shorter pieces.
– fruit with fine stones (e.g. chokeberry, raspberry, currant) should be processed in small
batches, approx. 0,5 kg. Before processing another batch disconnect the device and
disassemble for cleaning (see CLEANING).
– do not process ice in the juicer,
– frozen fruits can only be processed with filter C installed,
– when pressing herbs or leafed vegetables, for optimal results tie them together to form a
dense package, or press them together with hard products,
- The device is not used for extracting the juice of the long fiber portion and hard stem (e.g.
the stem of parsley)
– apple juice gets dark really fast. To slow this process, ass a few drops of lemon juice,
– processing very soft fruits is difficult. For example, bananas should be used as the first or
second ingredient. Banana nectar will flow out with juice pressed from other fruit,
– the device should not be used to press juice from very hard or starch-rich fruit or
vegetables such as sugarcane,
– to achieve the best efficiency, when pressing fruit or vegetables of different consistency,
use soft products first and follow up with the harder ones.
VIII CLEANING AND STORAGE INSTRUCTIONS
PRE-CLEANING
After processing the products, the ESSENCE juicer should be pre-cleaned. To this end, pour
clean water into the feed chute in the cover (2) while the device is working. When changing
the processed products (if we do not wish to mix the juice) pre-cleaning allows to rinse the
juicer without disassembling the entire device.
CLEANING
When the device is not used, or before thorough cleaning, it should be disconnected from
the power grid. It's easiest to clean the device right after use. Do not use abrasive agents,
cleaning powders, acetone, alcohol, etc. to clean the device.
All removable parts can be washed on the top shelf of the dishwasher. Make sure that they
are placed away from the heater. Maximum temperature is 50°C.
Before cleaning, turn off the device and disconnect the power cable, disassemble the
components of ESSENCE juicer in the following sequence:
– remove the plunger (1),
– unlock (turn to the left) and remove the cover (2),