background image

5

4

Deep Kneading Action

Comfort Head Rest

For a more relaxing massage

Two-way Direction Selector

Adjusts kneading action inward or outward

Large Rubberized Handles

Comfortable grip for use on all body parts

Figure A

Figure B

Figure C

Figure D

Figure E

WARNING

Do not jam or force any part of your body (i.e. hands, neck, feet, etc..)
between the unit’s dual massaging “heads”.  Only gentle force should be
exerted against the unit in order to eliminate any/all risk of injury.  You
may soften massage force by placing a towel between yourself and the
unit.  Test unit force before using on yourself or on a companion.

Instructions for Use

To reduce the risk of electrocution, this appliance has a polarized
plug (one blade is wider than the other). As a safety feature, this
plug will fit in a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper outlet. Do not attempt
to defeat this safety feature.

1. Plug into a 120-volt outlet.
2. To start the massage, slide the selector switch up or down for an

inward or outward kneading motion. The center position is “off”.

3.

Neck Massage:

Lie on the floor and position the mechanical

kneading thumbs under your neck (

See Figure A

). For increased

comfort, place the head rest under your head to help support
your head and neck during massage (

See Figure B

).

4.

Arm or Foot Massage:

Place the massager on the floor or other

hard surface and rest your arm or foot between the mechanical
kneading thumbs (

See Figures C & D

). 

5. Large, rubberized handles provide a comfortable grip for use

alone or with a partner (

See Figure E

).

Maintenance

To Store

Place massager in its box or a safe, dry, cool place. Avoid contact
with sharp edges or pointed objects which might cut or puncture the
fabric surface. To avoid breakage, do not wrap the power cord around
the unit. Do not hang the unit by the cord.

To Clean

Unplug the unit and allow it to cool before cleaning. Clean only with
a soft, slightly damp sponge. Never allow water or any other liquids
to come into contact with the unit.
• DO NOT immerse in any liquid to clean. 
• NEVER use abrasive cleaners, brushes, gasoline, kerosene,

glass/furniture polish or paint thinner to clean.

• DO NOT attempt to repair this unit. There are no user serviceable

parts. For service, send the unit to the HoMedics Service Center
address listed in the warranty section.

Reviews: