The Seville chair includes an integrated, layered cushion for customized comfort as shown in
Figure 10
. You may choose to use this cushion or flip it behind the chair back to have less
padding covering the massage mechanism. It is most likely that you will have the cushion
in the forward position when the chair is not in use or when just sitting in the chair. When
enjoying the massage function, the use of the cushion will depend on your personal
preference — you may soften the massage intensity by using the layered cushion and
strengthen the intensity by not using it.
Automatic Shut Off
The Seville chair has been designed for convenience and safety. As a special precaution
against falling asleep while using the unit, or leaving the unit on while it is still in
operation, we’ve programmed it to automatically stop working after 15 minutes. This
special feature should not be considered as a substitute for OFF. Always remember to
turn your unit off when not in use.
Maintenance
To Store
: Avoid contact with sharp edges or pointed objects which might
damage/puncture the fabric.
To Clean
: Disconnect massage chair from power source before cleaning.
The massage cushion and control panel may be cleaned with a soft,
damp cloth only.
• The massage cushion is not machine washable and must not come
into contact with water or any other liquids.
• Do not immerse into liquids to clean.
• Never use abrasive cleaners, brushes, gasoline, kerosene, polish or
paint thinner to clean.
• Do not attempt to repair your massage chair. There are no user
serviceable parts. For service, send the unit to the HoMedics service
address listed in the warranty section.
Frame
: Periodically, the frame should be checked to ensure the screws
are tight. If the frame is found to be loose, tighten screws with the tools
provided.
The Seville and massage chair and ottoman are designed for indoor
applications only. Use of this product for outdoor applications may cause
irreparable damage and void your warranty.
Back Frame Removal for Warranty Service
If you experience a problem with the massage mechanism located in the
back frame of the Seville massage chair within a two year period, send
this component to the HoMedics Service Center for repair as noted in
the warranty on page 12.
To disassemble the back frame, first disconnect the power source located
behind the chair at the back cushion base and seat cushion.
See figure 7
on page 6 for an illustration. Now completely unscrew the bolts located
along the base of the back cushion to detach from the chair.
See figure 3
on page 5. Once removed, please see the warranty on page 12 for
further instruction.
Do not use the chair or connect it to a power source while
disassembled.
Figure 10
8
9
SEV1_IB_6.qxd 8/11/05 2:42 PM Page 9
