5
DST on or off. Press “
SET
” button to confirm your
selection.
Now you will select the calendar settings-
6.
Select Year
- Use the “
+
,
-
” buttons located on the
back of the home receiver to adjust year setting. Press
“
SET
” button to confirm your selection.
7.
Select Month
- Use the “
+
,
-
” buttons located on the
back of the home receiver to adjust month setting. Press
“
SET
” button to confirm your selection.
8.
Select Day
- Use the “
+
,
-
” buttons located on the back
of the home receiver to adjust day setting. Press “
SET
”
button to confirm your selection.
9.
Centigrade/Fahrenheit Selection
- You can now select
either Centigrade or Fahrenheit temperature readings.
Use the “
+
,
-
“ buttons located on the back of the home
receiver to toggle between Centigrade or Fahrenheit
readings. Press “
SET
” button to confirm your selection.
SETTING ALARM TIME
1. Hold the “
CLEAR
” button for 3 seconds. Press “
+
,
-
“
to enter the desired Hr/ Min values and press “
CLEAR
”
to confirm setting.
2.
To view alarm time
- Press “
CLEAR
” button. Alarm
time will display for 5 seconds and then resume to normal
clock thereafter.
3.
To select between daily alarm and snooze alarm
-
Press “
+
“ button on the back of the unit.
4. The home receiver will provide either a daily alarm, which
last for 2 minutes or a snooze mode where the alarm will
repeat every 8 minutes until manually cleared (see
SNOOZE/LIGHT section below.)
RADIO-CONTROLLED CLOCK
The unit will start synchronizing the clock after the 1st channel of the RF
thermometer is registered.
1. At normal mode, hold the “ - ” button located on the back of the home
receiver for 3 seconds to force synchronization.
2. The antenna icon will appear during the synchronization process.
3. If the icon disappears afterwards, radio time signal is not available at that
moment. Try setting the home receiver in other locations. Remember to
place the unit away from sources of interference such as mobile phones,
appliances, TV etc.
4. Antenna icon will appear on screen if the radio time reception is suc-
cessful. The radio-controlled clock will have a daily synchronization at
1:00am everyday. If previous attempts of reception were unsuccessful,
the unit will attempt synchronization each hour until successful.
5. Each reception cycle is minimum 2 minutes and maximum 10 minutes.
TIME ZONE
Press “
ZONE
” button on back of unit to select from the following time
zones in the U.S.-
P - Pacific Standard Time
M - Mountain Standard Time
C - Central Standard Time
E - Eastern Standard Time
MANUAL SETTING FOR CLOCK & CALENDAR
1. Hold “
SET
” button for 3 seconds to enter clock set.
2. First, select 12 hour or 24 hour setting using the “
+
,
-
” buttons located
on the back of the home receiver. Press “
SET
” button to confirm your
selection.
3.
Select Hour
- Use the “
+
,
-
” buttons located on the back of the home
receiver to adjust hour setting. Press “
SET
” button to confirm your
selection.
4.
Select Minute
- Use the “
+
,
-
” buttons located on the back of the
home receiver to adjust minute setting. Press “
SET
” button to confirm
your selection.
5.
DST On/Off
(Daylight Savings Time) - Use the “
+
,
-
” buttons to turn
4
