20
19
3. After all symbols disappear, the display will
show a blinking “0”. The monitor is
“Ready to
Measure”
and will
automatically
inflate the
cuff to start measurement.
4. Once your systolic pressure is determined, the monitor
will begin deflating to measure your diastolic pressure.
Note:
This monitor will re-inflate automatically if the
system detects that your body requires more
pressure for measurement.
5. When the measurement is completed, the cuff will
deflate. Systolic pressure, diastolic pressure and
pulse will be shown simultaneously on the LCD
screen.
The measurement is then automatically
stored into memory.
1. Press the
User Select Button
to choose User 1
or User 2.
After the user number is selected, press the
START/STOP button
to confirm the chosen user.
2. With the cuff wrapped around your arm, press the
START/STOP button
. Do not inflate the cuff unless it
is wrapped around your arm. All digits will light up to
check the display functions. The checking procedure
will be completed after about 2 seconds.
/
START
STOP
/
START
STOP
OR
