13
Getting Started
The Meter turns on when a Test Strip is inserted into
the Test Port or when Set Button is pressed (
see
Memory). Meter turns off when the Strip is released
or after 2 minutes of non-use.
We recommend performing Control Tests for
practice before using your Meter for the first time to
test your blood. Control Tests should also be
performed:
• Occasionally as you use the vial of Test
Strips,
• When opening a new vial of Strips,
• When Meter results seem unusually low or high, or
• If Meter damage is suspected (Meter was dropped,
crushed, gotten wet, etc.).
Quality Control Testing
To assure you are getting accurate and reliable
results, TRUE2go offers two kinds of quality control
tests. These tests let you know that your TRUE2go
System is working properly and your testing
technique is good.
T2go_OB_GutsENG_F4HDI04.qxd:TT_OB_GutsENG.qxd 1/29/10 10:38 AM Page 13
