Model LBP30
Smart
Pulsewave Blood Pressure Monitor
Number
Phenomenon of fault
Possible reason
Solution
1
No display appears
on the unit
No power
Use the AC adaptor to supply
power
2
Unable to measure
or measurement
value is too high
Arm cuff may not
be at the same level
as the heart
Please apply the arm cuff
correctly and keep quiet
3
Measurement values
appear too high or
too low
The measurement
values will change
at times when you
measure under
tension
Take a deep breath before
measurement to relax
yourself and keep quiet
PRODUCT SPECIFICATIONS
Name:
Smart
Pulsewave Blood Pressure Monitor
Model: LBP30
Measurement Range: Pressure: 0-270(mmHg) (0-36[kPa])
Pulse Rate: 40/min-180/min
Accuracy: Pressure: ±3mmHg (±0.4kPa)
Pulse Rate: ±5%
Power Supply: DC3.7v (Li batteries)
Operating Temperature / Relative Humidity: 5
℃~
40
℃
, 15%RH
~
80%RH
Storage and Transportation Temperature / Relative Humidity: -20
℃~
+55
℃
, ≤93%RH
Air Pressure: 80kPa
~
106kPa
Storage and Transportation Air Pressure: 50kPa
~
106kPa
Main Unit Dimension (not including the cuff):
165mm
(
L
)
×116mm
(
W
)
×67mm
(
H
)
Shock Protection: Internal power source; BF TYPE
Main Unit Weight (including the cuff): Approximately
287g
Applicable Arm Circumference: 22cm
~
32cm