Model LBP30
Smart
Pulsewave Blood Pressure Monitor
6. After inflation stopped, the bladder will deflate with a constant speed, the
monitor enters the measuring state and the value on the display goes down.
7. After the measurement finished, the DualCuff deflates quickly, and your blood
pressure and pulse rate will show on the display. First systolic blood pressure and
diastolic pressure are shown, two seconds later, pulse rate is shown. The blood
pressure and pulse rate will be shown on the display circularly.
8. Press the button “
” to turn off the monitor. If you want to quit the
measurement in the process of measurement, please press the button “
”.
NOTES:
1.
The monitor will automatically turn off after 60 seconds without operation.
2.
Do not repeat the measurements in a short time, or it may cause the arm blood
can’t timely return which may result in incorrect results. A new measurement
can be started after at least 1 minute once the previous measurement finished.
3.
If in the measurement process the body movement occurs, an error message will
appear (refer to the section “ERROR INDICATORS”) , please re-measure and
keep quiet until the measurement finished,
