Before using the product for the first time, please
read the instructions for use below and retain them
for later reference. The original instructions were written
in the Hungarian language.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised at all times to
ensure that they do not play with the appliance.
FEATURES
40 cm diameter • adjustable fan speed (3 levels) • stationary or oscillating (90°) • wind
function (2 levels) • timer (30 minutes – 7.5 hours) • all functions can be remote-
controlled • adjustable height (110 - 130 cm)
ASSEMBLING THE FAN
1.
Remove the packaging carefully; avoid scratching the plastic cover with the
scissors or knife.
2.
Attach the rear part of the grid to the engine.
3.
Put on the grid holder screw.
4.
Attach the fan to the axis, then fasten it with the fan holder screw.
5.
Then attach the front part of the grill to the fan and fasten it using the tabs.
6.
Assemble the stand as described below, and attach the just finished fan assembly.
ASSEMBLING THE STAND
1.
Attach the bottom stand section (12) to the base using a screw.
2.
Set the desired height and fasten it with the fastening ring (11).
3.
Then mount the fan assembly on it. Fasten using the screws.
OPERATING THE FAN
Set the fan on a stable and horizontal surface. Plug the power supply cable into a wall
outlet. The POW LED will illuminate to confirm that the fan has been powered on.
Once the fan is assembled, you can control it with the buttons on the control panel. All
functions can also be remote-controlled.
To start the fan, press ON/SPEED; pressing this button repeatedly toggles between the
3 speed levels. To stop the fan, press the OFF button. The fan can also oscillate; to
switch this movement on and off, press SWING. The active or disabled state of each
function is indicated on the control panel (red LEDs).
WIND FUNCTION
The fan creates air flow that is reminiscent of natural wind, further enhancing your
sense of comfort. There are two types of such air flow: NAT (natural wind) and SLE
(softer natural wind). To use the wind feature:
1.
Press MODE repeatedly to toggle between NAT and SLE.
2.
To switch off, use the MODE button again to cycle to the NOR (normal mode) function.
TIMER
You can set a timer that will switch the fan off automatically. The switch-off time can be
adjusted between 30 minutes and 7.5 hours, in intervals of 30 minutes. To activate this
feature:
1.
Set the switch-off time using the TIMER button. A red LED above the active value
indicates the selected time; when multiple numbers are lit up, the switch-off time is
the sum of these.
2.
To disable the switch-off function, press TIME repeatedly until none of the LEDs
above the time values is lit up.
CLEANING & MAINTENANCE
In order to ensure optimum functioning, the unit may require cleaning at least once a
month, depending on the manner of use and degree of contamination.
1. Switch off and power off the unit by unplugging it from the electric outlet prior to
cleaning.
2. Warning: Only remove the front protective grille from the fan if it has been powered off.
3. Use a slightly moistened cloth to clean the unit’s exterior. Do not use any
aggressive cleaners. Avoid getting water inside of and on the electric components
of the appliance.
4. Warning: Only replace the front protective grille on the fan if it has been powered off.
5. Only power on the fan after this has been done.
TROUBLESHOOTING
WARNINGS AND PRECAUTIONS
1. Confirm that the appliance has not been damaged in transit.
2. The appliance must not be used with programmable timers, timer switches or
stand-alone remote controlled systems that can automatically turn the unit on
because any covering or improper location of the unit can cause an accident.
3. Do not use in locations where flammable vapors or explosive dust may be present.
Do not use near flammable materials or in potentially explosive atmospheres.
4. Operate only under constant supervision.
5. Do not operate unattended in the presence of children.
6. Only for indoor use, in a dry place. Protect from humidity (e.g. bathrooms,
swimming pools).
7. It is PROHIBITED to use the unit near bathtubs, basins, showers, swimming
pools or saunas.
8. It is prohibited to use the appliance in motor vehicles or in confined spaces
2
(< 5 m ) such as elevators.
9. When not planning to use the unit for an extended period of time, switch it off
then remove the power plug from the outlet.
10. Always remove power from the appliance before relocating it.
11. Lift only by the carrying handle!
12. If any irregular operation is detected (e.g., unusual noise or burnt odor from unit),
immediately switch it off and remove the power plug.
13. Make sure that no foreign objects or liquid can enter the unit through the openings.
14. Protect from dust, humidity, sunlight and direct heat radiation.
15. Power off the unit by unplugging it from the electric outlet prior to cleaning.
16. Before removing or replacing the protective grille, always remove power from the
fan by unplugging it from the electric outlet.
17. Do not touch the unit or the power cable with wet hands.
18. The appliance may only be connected to 230 V AC / 50 Hz electric wall outlets.
19. Unwind the power cable completely.
20. Do not lead the power cable over the appliance.
21. Do not lead the power cable under carpets, doormats etc.
22. The appliance should be located so as to allow easy access and removal of the
power plug.
23. Lead the power cable so as to prevent it from being pulled out accidentally or
tripped over.
24. The unit is intended for household use. No industrial use is permitted.
Disposing of alkaline and rechargeable batteries
Batteries, whether alkaline or rechargeable, must not be handled together with regular
household waste. It is the legal obligation of the product's user to dispose of batteries at
a nearby collection center or at a retail shop. This ensures that the batteries are
ultimately neutralized in an environment-friendly way.
SPECIFICATIONS
power supply: 230 V ~ / 50 Hz
3
maximum air mass volume: F = 50,0 m /min
fan input power: P = 45,0 W
3
service value: SV = 1,11 (m /min)/W
power consumption during standby: P = 0,5 W
SB
fan acoustic power level: L = 70 dB (A)
WA
maximum air speed: c = 4,8 m/sec
length of power cable: 1,5 m
fan blade diameter: 40 cm
fan height (adjustable): 110 – 130 cm
remote controller power supply:
2 x AAA (1,5 V) batteries (not included)
0
0
0
0
0
0
0
0
0
Caution: Risk of electric shock!
Do not attempt to disassemble of modify the unit or its accessories. In case
any part is damaged, immediately power off the unit and seek the assistance
of a specialist.
In the event that the power cable should become damaged, it should only be
replaced by the manufacturer, its service facility or similarly qualified
personnel.
Do not discard with communal waste. At the end of its life, dispose of product at a
facility specializing in the collection of electronic waste. If you have any question
or remark in connection with this, contact the seller or local waste management
organization. By doing so, you will protect the environment as well as the health
of others and yourself.
SFP 40
standing fan
Cause
Solution
The fan does not turn on
Check the power supply
The fan does not respond
Check the remote controller batteries
to the remote controller’s signals