Home C010, Instruction Manual, Page: 10 / 36

3 Unpacking and setting up the
machine
1. Lift the machine out of the box and place it on a clean and
even work surface.
1.1 Ensure that there is enough free space above the ma-
chine to be able to open the chamber lid.
1.2 The distance from all side panels must be at least 10 cm.
2. Check whether the scope of delivery is complete.
3. Remove all the protective film.
4. Check whether the machine is damaged. If the machine is
damaged, inform the manufacturer and send the machine
back to them.
5. Clean the machine. See Section 7 "Cleaning" on page
23.
6.
Insert the power cord into the machine.
7. Plug the mains plug into the socket.
Unpacking and setting up the machine
10 / 34 25.09.2017