8
Using Attachments
NOTE:
When installing or changing attachments, be sure the unit is off, unplugged, and no
steam is being released to avoid contact with hot water.
1.
Fabric Brush
Helps open the fabric for greater steam penetration
- Attach the fabric brush onto the steam nozzle (Fig. 3).
- Move the fabric brush in a downward motion from top to bottom gently brushing the fabric.
2.
Crease Clamp
Helps create a straight crease
- Attach the crease clamp to the steam nozzle (Fig. 5).
- Push the trigger to open the crease clamp.
- Place the garment between the crease clamp and steam nozzle.
- Release the trigger.
- Move the crease clamp in a downward motion from top to bottom to set a crease.
Cleaning and Maintenance
1. Be sure the steamer is turned off and unplugged.
2. Allow the steamer to cool for at least 30 minutes.
3. Empty any excess water from the water tank and allow it to air dry before replacing the cap
and setting it back in the unit.
4. Empty excess water from the reservoir by tipping unit over a sink
Storing
1. Open the 3 clips (Fig. 2) on the telescopic pole and glide it slowly to
collapse being careful not to pinch your fingers. When it is all the way down
close the 3 clips back into place.
2. Coil the hose and place on the hanger attachment (Fig. 9)
3. Store in a cool, dry place.
Figure 9
