5
Perfect Steam Features
• Safe for use on all types of fabrics
• Quick heat-up feature emits steam in 45 seconds
• Convenient integrated garment hanger
• Telescoping design for compact storage
• 5 foot flexible hose with Safe Touch® hose cover for safe and
comfortable handling
• Easy-fill water tank provides 45 minutes of continuous steam
• Rolling casters for excellent mobility
• Low water auto shut-off for safe use
Assembly Instructions
1 Carefully remove all contents from packaging and inspect the
product to make sure all components have been received (Fig. 10).
2. Insert pole into top of unit. Match the grooves on the pole with the
notches in the pole connector and push down. Securely tighten the
nut on the pole over the connector by turning it clockwise (Fig 1).
3. To attach the hanger attachment, align tabs in hanger attachment
with grooves on pole and push down (Fig. 2).
4. Fully extend the telescopic pole. To do so, open the 3 clips on the
pole and pull the pole upwards (Fig. 2). When fully extended close
the clips. Make sure that the pole is securely locked into place
and cannot be pushed downward.
5. Attach the fabric brush to the nozzle by setting into place (Fig. 3).
6. Attach handle & hose assembly to unit. Line up the nut on the
hose with the screw on the hose connector. Turn nut clockwise
until it is securely tightened on the hose connector, (Fig 4). It
should be tightly screwed into place. Then you may hang the
steamer handle onto the hanger attachment (Fig. 3).
NOTE:
Do not hang the hose on the hanger attachment until after
it has been connected to the base to prevent the hose from falling
on you.
7. Attach the crease clamp (Fig. 5) onto the nozzle tab and gently
push into place.
NOTE:
Do not use the crease clamp and the fabric brush at the
same time
Pole
Turn
Turn
Nozzle
Tab
Crease
Clamp
Clips
Hanger
Attachment
Fabric
Brush
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
