10
Trouble Shooting the Steamer
PROBLEM
CAUSE
SOLUTION
Steamer fails to heat
Steamer not plugged in
ON/OFF switch not in
“ON” position
Auto shut off engaged
Plug in to electrical outlet
Push switch to “ON”
position. Switch will
illuminate.
Check water container to
ensure it is not empty. If
full, press the reset button
on side of unit. If empty,
refill and push reset to
begin.
No steam
Water level is low
Turn ON/OFF switch OFF
and refill water container
Water drips from nozzle
Condensation in hose
Hold the hose vertically
and allow water to drain
back into tank
Nozzle gurgles
Condensation in hose
Hold the hose vertically
and allow water to drain
back into tank
Steam is intermittent
Mineral build-up
Follow the procedure for
removing mineral build-up
