7
6
En
glish
En
glish
comes with a built-in SKIN COLOR SENSOR that is designed to measure the complexion of the
applied surface and enable application only on suitable skin complexions. This unique safety feature will
not let you treat where your skin is too dark or too tanned.
Furthermore, the 1.3X3 cm² Treatment Surface through which pulses of light are delivered is recessed
inside the LAMP CARTRIDGE. This enables Silk’n Flash&Go™ to protect your skin by avoiding direct
contact between the TREATMENT SURFACE and the skin.
Silk’n Flash&Go™ protects your eyes
Silk’n Flash&Go™ has a built-in safety feature for eye protection. It has been designed so that a light
pulse can not be emitted when the TREATMENT SURFACE is facing open air. The safety switch enables
treatment only when the TREATMENT SURFACE is in contact with the tissue.
4. Contraindications
Silk’n Flash&Go™ is not designed for everyone. Please read and consider the information in the following
section before use. For further information and personalized advice you may also visit www.silkn.com or
your local Silk’n™ domain. If you are unsure if Silk’n Flash&Go™ is safe for you to use, please ask your
doctor or dermatologist!
Important Safety Information – Read Before Use!
Warning
Possible results
Safety Tip
Do not use Silk’n Flash&Go on
naturally dark skin complexion.
See color skin chart at the
inner cover
Treating dark skin with Silk’n
Flash&Go can result in adverse
effects such as redness and
skin discomfort
A unique SKIN COLOR SENSOR is
embedded in Silk’n Flash&Go™ to
measure the treated skin complex-
ion at the beginning of each session
and occasionally during the session.
The SKIN COLOR SENSOR ensures
that pulses will only be emitted on
suitable skin tones.
Not Safe!
Warning
Possible results
Safety Tip
Do not use Silk’n Flash&Go on
tanned skin or after recent sun
exposure (including artificial
tanning machines).
Do not expose treated areas
to the sun.
Treating with Silk’n Flash&Go
before or after any sun ex-
posure can result in adverse
effects such as redness and skin
discomfort. Tanned skin par-
ticularly following sun exposure,
contains large quantities of the
pigment Melanin. all skin types
and complexions, including
those which don’t seem to tan
quickly. The presence of large
quantities of Melanin exposes
the skin to higher risk when
using any method of light based
hair removal.
Avoid exposure to the sun for 4
weeks before your Silk’n Flash&Go™
treatment!
Sun exposure includes unprotected
exposure to direct sunlight of over
15 minutes constantly, or unpro-
tected exposure to diffused sunlight
of over 1 hour constantly. To protect
recently treated skin when exposed
to sunlight, be sure to thoroughly
apply sunscreen SPF 30 or higher,
for 2 weeks after each hair removal
session.
Never use Silk’n Flash&Go
around or near the eyes.
Although, Silk’n Flash&Go™
can be used for the treatment
of facial hair, extra caution
should be used on the face to
avoid the eyes.
Silk’n Flash&Go™ has a built-in safety
feature for eye protection. It has been
designed so that a light pulse can not
be emitted when the TREATMENT
SURFACE is facing open air. The
safety switch enables treatment only
when the TREATMENT SURFACE is
in contact with the tissue.
Do not treat on tattoos or
permanent makeup, dark brown
or black spots, (such as large
freckles, birth marks, moles or
warts), nipples, genitals or lips.
Do not treat on tattoos or per-
manent makeup, dark brown
or black spots, (such as large
freckles, birth marks, moles or
warts), nipples, genitals or lips.
Cover area with material that will not
absorb the light such as a white cloth
or white medical tape.
Do not treat on active eczema,
psoriasis, lesions, open wounds
or infections (cold sores),
abonormal skin conditions
caused by systemic or
metabolic deseases (diabetes
for example)
Light based treatments can
cause adverse reactions on
already sensitive areas.
Wait for the effected area to heal
before using Silk’n Flash&Go™.
