background image

11

10

En
glish

En
glish

If you have a history of skin cancer or areas of potential skin 

malignancies.

Consult with your physician prior to 

using the Silk’n Flash&Go.

If you have received radiation therapy or chemotherapy treatments 

within the past 3 months.

If you have any other condition which in your physician’s opinion 

would make it unsafe for you to be treated.

If your skin was treated with a physician-prescribed drug within the 

past 6 months, please consult with your physician.

7.  Possible side effects using Silk’n Flash&Go™

When used according to the instructions, side effects and complications associated with use of Silk’n 

Flash&Go™ are uncommon. However every cosmetic procedure, including those designed for home use, 

involves some degree of risk. Therefore it is important that you understand and accept the risks and 

complications that can occur with pulsed light hair removal systems designed for home use.

Adverse Reaction

Degree of Risk

Minor Skin Discomfort – 

Although home pulsed light hair removal is generally very well-tolerated, most users do feel 

some mild discomfort during use, usually described as being a mild stinging sensation on the 

treated skin areas. The stinging sensation usually lasts during the time of the application itself 

or for a few minutes thereafter.

Anything beyond this minor discomfort is abnormal and means that either you should not 

continue to use Silk’n Flash&Go™ because you are unable to tolerate the hair removal 

application, or that the energy level setting is too high.

Minor

Adverse Reaction

Degree of Risk

Skin Redness – 

Your skin may become red right after using Silk’n Flash&Go™ or within 

24 hours of using Silk’n Flash&Go™. Redness generally clears up within 24 hours. See your 

doctor if redness does not go away within 2 to 3 days.

Minor

Increased Sensitivity to Skin – 

The skin of the treated area is more sensitive so you may 

encounter dryness or flaking of the skin.

Minor

Pigment Changes –  

Silk’n Flash&Go™ targets the hair shaft, in particular the pigmented 

cells in the hair follicle and the hair follicle itself. Nevertheless there is risk of temporary 

hyperpigmentation (increased pigment or brown discoloration) or hypopigmentation 

(whitening) to the surrounding skin. This risk of changes in skin pigmentation is higher 

for people with darker skin tones. Usually discoloration or changes to skin pigment are 

temporary and permanent hyperpigmentation or hypopigmentation rarely occur.

Rare

Excessive Redness and Swelling –  

In rare cases treated skin may become very red and 

swollen. This is more common in sensitive areas of the body. The redness and swelling 

should subside within 2 to 7 days and should be treated with frequent applications of ice. 

Gentle cleansing is OK, but one should avoid exposure to sun.

Rare

 

8. Long Term Hair Removal the Silk’n 

    Flash&Go™ Way

A typical full hair growth cycle may take 18-24 months. During this time multiple Flash&Go™ sessions 

may be required in order to achieve permanent results.

The efficiency of hair removal varies from person to person according to body area, hair color, and how 

Silk’n Flash&Go™ is used.

Typical Silk’n Flash&Go™ hair removal plan during a full hair growth cycle:

Treatments 1-4 – plan two weeks apart

Treatments 5-7 – plan four weeks apart

Treatments 8 + – treat as needed, until desired results are achieved.

Please note: Hair removal by lasers or intense pulse light sources can cause increased hair 

growth in some individuals. Based upon currently available data, the highest risk groups 

for this response are females of Mediterranean, Middle Eastern and South Asian heritage 

treated on the face and neck.

Summary of Contents for Silk'n Flash&Go











Reviews: