H+P programmer is designed to be installed on
a wall.
There’s a special
plastic holder
, which should
be screwed into the wall or installed by a
strong dou-
ble sided tape
.
The holder has hooks locking the programmer.
It’s also possible to put the programmer on a level
surface
. You need to be carefull. Any fall on the floor
can cause a mechanical damage of a casing and/or
a display.
Operating
Intuitive selection of functions (programmer’s buttons)
Installation
Safe use of H+P programmer
MENU
– returns
directly to main
screen
BACK
– goes back
to level up
ENTER/CONFIRMATION
of the chosen option.
The most used.
SELECT
–
moving on the screen
The H+P programmer is ready to use after unboxing.
If battery is discharged connect the charger
using a
microUSB port
on the side of the housing.
Full charge is enough for 4-5 months of use.
Graphical interface leads
to next steps automatically. Use:
+
buttons or select
‹›
microUSB
–
side
of the programmer
8
