SAFETY
The H+P programmer is powered by the battery, which is permanently mount-
ed in the device. Use only approved power supply (charger) – the type is giv-
en below. Use of incompatible charger may cause fire or explosion of the battery.
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not be made by chil-
dren without supervision. The device complies with the directive RED 2014/53/UE
MAINTENANCE
The casing may be cleaned using a soft cloth. Avoid soaking the casing.
BATTERY CHARGING
When programmer shows low battery level, connect the suitable charger (with mi-
croUSB connector) to microUSB socket on the side of programmer’s casing. Recom-
mended charger: Goobay 46600. We recommend to disconnect the charger when the
battery is fully charged (the battery icon on the programmer display is fully green).
TECHNICAL DATA:
Power/charge:
charger Wentronic, Goobay 46600, 1000 mA, 5V, microUSB.
Radio comunication frequency:
867,8 MHz, power transmitter <10dBm.
Operating temperature range:
0-45°C.
Temperature control range:
10-30°C.
Work cycle:
weekly, programmable.
Work status control:
OLED display.
Operating range:
depending on the structure of the building and walls – ca.30m,
in the open area – more than 100m.
TECHNICAL INFORMATION/SAFETY
Check more at:
www.homeplus-system.com
3
