Home>it 60.722 User Manual Download Page 10

  Safety Instruction

s

  Contents

Thank you for your confidence in choosing this machine. To achieve best 

results, read this manual carefully before using the machine. Always keep the 

manual together with the machine.

IMPORTANT!

When using, the following basic safety rules must be complied with.

Safe operation of the machine requires that you read the operating manual and 

safety instructions and comply with them before using the machine for the first 

time. You should also observe general safety rules. If possible, get an expert to 

show you how the machine works before using it for the first time.

UK - User's Manual

•  Don’t touch high-voltage power cord 

  of the electric appliance with your 

  wet hand, or it may cause electric 

  shock.

•  Don’t twist your clothes or any part 

  of your body (head, finger, etc.) into 

  the brush or wheel of the Robot, or it 

  may cause personal injury.

•  Don’t use other charger but the 

  equipped one of the Robot, or it may 

  cause product damage, electric 

  shock or fire due to high voltage.

•  Don’t bend the power cord overly 

  or place weight on it, or it may cause 

  power cord damage, fire or electric 

  shock.

•  Don’t approach cigarette, lighter, 

  match and other heat objects or 

  combustible materials such as the 

  gasoline cleaner.

•  Don’t forget to turn off the power 

  while transporting or storing the 

  cleaner for long, or the battery may 

  be damaged.

•  Check whether the charger and 

  socket is connected well, or it may 

  cause charging failure or even fire.

•  Insert the power cord of the charger 

  well or it may cause electric shock, 

  short circuit, smoking or fire.

•  Remove all easily damaged objects 

  (including luminous objects, fabrics, 

  glass bottles, etc.) before using, or it 

  may cause damage to these objects 

  or affect the using of the cleaner.

•  Please use the Cleaner cautiously in 

  the presence of the children to avoid 

  frightening or harming them.

•  Don’t stand or sit on the Cleaner, or 

  it may cause damage to the Cleaner 

  or personal injury.

•  Don’t make the Cleaner take in water 

  and other liquors for fear of the 

  product damage.

•  Don’t use the Cleaner on small tables 

  and chairs or other small space, 

  otherwise the Cleaner may be 

  damaged.

•  Don’t use the Cleaner outdoors, or it 

  may cause the product damage.

•  Don’t use the Cleaner in commercial 

  places, or the Cleaner may be 

  damaged by excessive use.

•  If the machine is defective, 

  always contact your dealer or    

  Millarco's service department at 

  tel.: (+45) 87434233 or  

  by e-mail: [email protected] 

1. 

Applicability................................................................... 

22

2. 

Components of the Cleaner ............................................. 

20

3.   Introduction .................................................................. 

20-22

 

Top of main body ..................................................... 

20

 

II 

Bottom of main body ............................................... 

20

 

III  Control panel of main body ....................................... 

21-22

4. 

Charging for the cleaner ................................................. 

23

 

Manual Charging .................................................... 

23

 

II 

Auto charging ......................................................... 

23

5. 

Assembly & Disassembly ................................................ 

23-25

 

Assembly & Disassembly and Cleaning of Dustbin ........ 

23-24

 

II 

Assembly & Disassembly and Cleaning of the mop ....... 

24

 

III  Assembly & Disassembly and Cleaning of the main 

 

 

brush and side brush ............................................... 

24

 

IIII  Assembly & Disassembly and Cleaning of the battery ... 

25

6. 

Remote Control ............................................................. 

25-26

7. 

Docking charging ........................................................... 

26-27

8. 

Preset cleaning time ...................................................... 

27-28

9. 

Virtual wall ................................................................... 

28-29

 

Using Method & Functional Status of virtual wall .......... 

28

 

II 

Function Introduction of virtual wall ............................ 

28

 

III  Installation method of vitual wall ................................ 

29

10.  Trouble shooting ............................................................ 

29-30

11.  Environmental protection ................................................ 

31

12.  Service & Reparation ..................................................... 

31

13.  Technical Specifications .................................................. 

32

14.  Declaration of Conformity ............................................... 

33

(18

(19

Summary of Contents for 60.722


















Reviews: