background image

 2
 

Table of Contents

Table of Contents   . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Planning Installation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tools Required  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Hardware Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Package Contents   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Troubleshooting   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Safety Information

 

Consult a qualified electrician if you have any electrical 

questions.

 

NOTE: This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to part 15 of 

the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance 

with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference 

will not occur in a particular installation. If this equipment does 

cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user 

is encouraged to try to correct the interference by one or more of 

the following measures: 

 

- Reorient or relocate the receiving antenna. 

- Increase the separation between the equipment and receiver. 

- Connect the equipment into an outlet on a circuit different   

   from that to which the receiver is connected. 

- Consult the dealer or an experienced radio/TV technician for  
   help.

 

This device complies with part 15 of the FCC rules. Operation is 

subject to the following two conditions: (1) This device may not 

cause harmful interference, and (2) this device must accept any 

interference received, including interference that may cause 

undesired operation.

 

The following responsible party designated in FCC §2.909 is 

responsible for this declaration: 

Bel Air Lighting 

28104 Witherspoon Pkwy. Valencia CA 91355 

CAUTION:

 Inspect the wire insulation for any cuts, 

abrasions, or exposed copper that may have resulted during 
shipping. If there is a defect in the wire, do not attempt 
installation. Please call our Customer Service Team at 
1-800-986-3460.

WARNING:

 Before starting installation of this fixture 

or  removal of a previous fixture, disconnect the power by  
turning off the circuit breaker or by removing the fuse at the  
fuse box.  

WARNING:

 Any changes or modifications to this unit not 

expressly approved by the party responsible for compliance 
could void the user’s authority to operate the equipment.

Warranty

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of three (3) years from 
date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If 
this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the 
product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, 
alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, 
or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the 
product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material 
or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is 
considered normal wear and tear.  The manufacturer does not warrant and specially disclaims any warranty, whether express or implied, 
of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and 
shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in the 
replacement or repair of said product. 
Contact the Customer Service Team at 1-800-986-3460 or visit www.homedepot.com/homedecorators.

Summary of Contents for 7151-NDM








Reviews: