6
Installation
2
Attaching the mounting bracket to the
junction box
□
Attach mounting unit (AA) to the junction box (not included)
with mounting screws (BB).
NOTE:
The pre-installed support screws on the mounting
bracket (AA) should protrude out away from the junction
box.
BB
AA
3
Making the electrical connections
□
Connect the copper wire on the light fixture (A) to the
mounting bracket (AA) by securing it with the preinstalled
ground screw.
□
Connect the black to black (power), the white to white
(neutral) and copper wire to ground wire with the wire
nuts (CC) and secure with electrical tape (not included).
NOTE:
If the wires from the fixture are the same color,
attach the side with markings or letters to the black
(positive) wire and the other to the white (neutral) wire.
CC
A
AA
4
Secure the light fixture
□
Secure the light fixture (A) to the junction box by placing
the canopy (D) over the support screws on the mounting
unit (AA) and securing it with the cap nuts (DD).
5
Install the light bulb
□
Install one medium base incandescent 60-watt max bulb
(not included).
DD
D
AA