ASSEMBLY
1 Assembling the Base Stand to the Leg/Foot
Insert the connecting rods on the bottom of each Leg/Foot (F) into the
matching connecting holes on the Base Stand (G).
2 Assembling the Body
Note: Attach the electrical plugs from the two Body Halves (E) together.
Align the two Halves of Body (E) with each other and insert the connecting
rods on one half into the connecting holes on the other half and fasten
together at the connecting loops with Plastic Ties (M).
3 Assembling the Leg/Foot to the Body
Note: Plug in the electrical cord from the Body (E) into the electrical plug
on the Leg/Foot (F) then tuck the cord inside the Body. Insert the
connecting rods on the top of each Leg/Foot (F) into the matching
connecting holes on the bottom of the Body (E) and fasten together at
the connecting loops with Plastic Ties (M).
4 Assembling the Arms/Hands to the Body
Insert the connecting rods on each Arm/Hand (D) into the matching
connecting holes on the sides of the Body (E) then fasten together at the
connecting loops with the Bolt & WingNut (L) and Plastic Ties (M) Note:
The Right Arm is the higher waving arm.
5 Assembling the Hat and Nose
Insert the connecting rods of Nose/Mustache (C) into the matching
connecting holes on the Head (B). Insert the connecting rods on the
Hat (A) into the holes at the top of the Head (B) and fasten together
at the connecting loops with Plastic Ties (M).
6 Assembling the Plug and Head
Note: Plug in the electrical cord attached to the Head (B) into the electrical
cord attached to the Body (E) then insert the connecting rods on the
bottom of the Head (B) into the connecting holes at the top of the Body
(E) and fasten together at the connecting loops with Plastic Ties (M).
F
G
M
E
F
M
E
M
L
D
E
D
B
C
A
M
M
B
E