11
10. Fault Finding Chart
Before maintenance or repair disconnect the pump from
the power supply to avoid accidental starting of the pump!
Fault Cause
Remedy
Motor does not start
•
Supply failure
•
Check power supply
•
Impeller is blocked
•
Clean the impeller
Pump does not turn off
•
Float switch is
blocked
•
Make sure that the
float switch can oper-
ate
Not enough flow, the
needed head will not
reached
•
Increased current
•
Measure the voltage
•
Water loss because
of leakage in the dis-
charge pipe
•
Seal the discharge
pipe
•
Too high operation
head
•
Check operation
head, replace by
stronger pump
•
Suction sieve is dirty
•
Clean the suction
sieve
Pump operates, but
switches off after a
while*
•
Motor winding defect
•
Return the pump to
our service dept.
•
Impeller is blocked
•
Clean the impeller
•
Temperature of the
medium is too high
•
Temperature of the
medium max. 35°C
•
Unsufficient motor
cooling, caused by
too low water level
•
Position the pump, so
that teh motor is
submerged
Pump operates at below
standard performance
•
Impeller is blocked
•
Clean the impeller
Pumpe operates, but
gives no liquid
•
Non-return valve
blocked
•
Clean the non-return-
valve
•
Air in pump
•
Vent the pump
* The pump motor is protected by a thermal sensor, which trips out
at high motor temperature, in order to prevent overheating. After re-
cooling the sensor switches on again automatically.
We grant for the described product in the warranty receipt a war-
ranty of declared duration in the warranty receipt. The warranty
starts with the first start up, latest with the day of sale. A warranty
claim can be raised only by presentation of the fill in warranty receipt
together with the purchase receipt.
Our warranty extends only the removal of material defects or produc-
tion defects. Costs for removal and installation of the complained
product at the installation place, costs for the ride of the mechani-
cians to the location and from the installation place as well as costs
for transport are not components of our warranty. Complains caused
by installation faults or operating faults, unsuitable operation condi-
tions, deficient care or improper efforts of repair are out of the ques-
tion of warranty as well as normal wear. Hereby arised costs, espe-
cially costs for checking and transport are bearing by the sender or
operator of the pump. This is also valid for an asserted warranty
claim if a check results that the unit works faultless and is free of
defects. All products have a high quality standard. Each product is
defeated by a streng technical end control before delivery. If the unit
still gives an occasion for a legitimated complain, you have the claim
of an appropriated correction free of charge. Warranty repairs only
must lead from the manufacturer or an authorized agency. Trials of
repair by the customer or non-authorized persons during the war-
ranty, causes an extinguishing of the warranty. A warranty repair
achieved by us does not extend the warranty period. Replaced spare
parts give no reasons for a new warranty period. Extensive claims
are excluderd, especially such as diminution, change or compensa-
tion also for any kind of follow up damages.
To guarantee a quick transaction of a warranty claim, please return
the product together with the warranty receipt, purchase receipt and
declaration of defect carriage paid to the manufacturer (for the
adress see warranty receipt).
Claims caused by damages of transport could be only accepted, if
the damage is established or confirmed by delivery in the presence
of the forwarder, parcel service, train or post.
Pump type
No.
Correspond to our warranty conditions
we achieve
12 months of warranty
HOMA Pumpenfabrik GmbH
Industriestraße 1
D-53819 Nk.-Seelscheid
Telefon: + 49 (0) - 22 47 - 70 20
Telefax: + 49 (0) - 22 47 - 7 02 44
Train station: D-53819 Nk.-Seelscheid
Warranty receipt
Warranty Conditions
