Holztech SD320
WWW.HOLZTECH.COM
6.1 Cleaning
All blank parts that are protected against rust clean with petrol or similar commercial cleaning agent.
Attention!
Do not use any kind of nitro or similar solving agent, by no means use water.
6.2 Fixing
The machine must be placed vertically on adequate ground. By rotating the installation bolts the machine
can be fixed in correct vertical position.
6.3 Electrical wiring
•
Wiring must be executed by authorized electrician.
•
The rotation direction of the motor is to be tested by short turnings on.
When wrong direction, disconnecting of motor to be done by authorized electrician.
•
Zero and ground lead must be available.
Tuming off machine to stand still only using the provided switch of this machine.
7.0 WORKPIECE DIMENSIONS
Planing
