Holztech SD320
WWW.HOLZTECH.COM
For small jobs always use auxiliary supports.
Attention!
The hands must never be placed on the knives shaft. The hand must always
be behind the knives shafts and the right hand must push the workpiece till
shortly before the shaft and then be withdrawn. The workpiece must always be
fed from above.
Planing of jobs of greater width.
•
Shift forward groove guide so that the required planing space is free.
•
Shift the knives shaft cover C to the groove guide (max. distance 8 mm) and increase job's
thickness.
•
Push the job a little under the cover C and let the latter lay upon the workpiece (see
fig. 1).
•
Press the job with both hands upon the feed table A and carefully feed towards the knives.
Hold tlie knives shafts cover with hand.
Proper handling
when planing
