Holzstar ADH 200, Instruction Manual

Page: 9 / 22

Machine description
ADH-Series | Version 1.05 9
The films are made of polyethylene (PE) and the uphol-
stery parts are made of polystyrene (PS). These materi-
als have to be delivered to a recycling station of the re-
sponsible dumping company.
Storage
The Planer-Thicknesser must be stored thoroughly
cleaned in a dry, clean and frost-free environment. Co-
ver the machine with a protective tarpaulin.
Environment temperature range: -25 °C to +55 °C.
6 Machine description
6.1 Illustration
The illustrations in these operating instructions serve the gen-
eral comprehension and may deviate from the actual type.
Fig. 3: Planer-Thicknesser ADH 250
1 Dust chute
2 Fence
3 Infeed table
4 Height setting of infeed table
5 Cutterblock cover
6 ON/OFF switch
7 Tool kit
8 Outfeed table
9 Overload protection switch
10 Height setting of thicknesser
Fig. 4: Hobelmesserwelle
A Screw
B Clamping segment
C Planer
D Spring
E Bearing
6.2 Scope of supply
ADH 200
- Planing machine
- Chip extraction hood
- Jointer fence
- Tube
- Dust bag
- Instruction manual
ADH 250 / 305
- Planing machine
- Chip extraction hood
- Jointer fence
- Push stick
- Screw, Clamping screw
- Hand knob
- Allen key
- Instruction manual
7 Installation and erection
7.1 Requirements for the place of installation
The Planer-Thicknesser must be stably erected on a le-
vel and solid ground. There must be enough space for
the operating personnel, for the transport of material as
well as for adjusting and maintenance. The place of in-
stallation should meet the following criteria:
- Make sure that the floor has sufficient load
bearing capacity and is level.
- The background must not let any lubricant through.