Holzstar ADH 200, Instruction Manual

Page: 11 / 22

Operation
ADH-Series | Version 1.05 11
8 Operation
8.1 Planing
In a planing can be reached out a depth up to 2 mm
(ADH 200 , ADH 305) or 3 mm (ADH 250). This depth
may be reached only by:
- Sharp planers
- Soft woods
- Maximum workpiece width
If these characteristics are not observed, there is a risk
of overloading.
Therefore: Edit a workpiece always in repeat worksteps,
until the desired material thickness is reached.
The planing of workpiece with the machine make as
follow:
Step 1: Assemble the chip extraction hood under at the
machine table. On the chip extraction hood be
find two plug connectors, which after positioning
must be pressed in the direction of the machine
table. For positioning these two plugs must pul-
led outside.
WARNING!
Every working at the electrical installation, systems
and equipment must only be carried out by a
qualified electrician.
DANGER!
Electric shock is life-threatening!!
There is a danger to life when you get in contact with
voltaged components. Electrical components which
are on can conduct uncontrolled movements and
cause severest injuries.
- Disconnect the mains plug before you start any
works on the machine.
WARNING!
Danger to life!
There is danger to life for the operator and for other
persons if they do not comply with the following
rules.
- Handling and working with the Planer-Thicknesser
is permitted only to persons who are familiar with
the handling and the mode of operation of the
machine.
- The operator must not work if he is under the influ-
ence of alcohol, drugs or medication.
- The operator must not work if he is overworked or
suffers from fatigue and difficulties in concentrating.
- The Planer-Thicknesser may only be operated by
one person. Other persons must not enter the wor-
king area during operation.
ATTENTION!
Danger of crushing!
In case of improver work on the Planer-Thicknesser,
there is danger to the upper limbs.
IMPORTANT!
Before commissioning check the electrical connec-
tion, cables and contacts.
Ear protection
Use ear protection!
Eye protection
Use protective glasses!
Protective gloves
Use protective gloves!
Safety boots
Use protective boots!
Protective clothing
Wear protective clothes!
NOTE!
The bracket (Fig. 6, yellow arrow) on the chip extrac-
tion hood activated a safety switch on the machine.
The machine can not be started if this safety switch
is not activated!