background image

14

SAA 902 | Version 1.03

Care, maintenance and repair

8

Care, maintenance and repair 

Daily Service

- Clean the machine after every use.

- Replace damaged security devices immediatel.

Weekly Service

- Clean the machine regularly with a damp cloth and 

some soft soap. Do not use detergents or solvents; 
these could attack the plastic parts of the machine. 
Make sure that no water can get inside the ma-
chine.

- Keep the guards, air vents and motor housings as 

dust and dirt free as possible. Wipe the machine 
with a clean cloth or blow it out with compressed air 
at low pressure.

- When changing and emptying the chip bag, wear a 

dust mask.

Monthly Service

- Control fixing bolts of the machine.

Service after 6 month

- Check electric and safety devices

8.1 Cleaning

Cleaning instructions at the extraction system

- Do not spray motor and switch directly with a jet of 
water and clean.

- Wear a dust mask when cleaning

- (Particulate Filter - Filter Class 2).

- Clean the electric motor and circuit breaker with a 
dry cloth only.

- Dump the dust bag before changing it

Tips and recommendations

The Chip Extraction Unit is constructed for efficient 
operating. To guarantee a long life the servicing 
aspects are to be carried out regularly.

DANGER!

Danger to life due to electrical 
shock!

Danger of live through electric shock by contact with 
live power components!

-  The Chip Extraction Unit may connected only from 

Qualified electrician.

-  Repairs on the electrical system must execute only 

from Qualified electrician.

-  Switch off the machine and pull the plug out before 

starting any cleaning or maintenance work.

WARNING!

Risk from inadequately qualified 
persons!

Inadequately qualified persons are unable to assess 
the risks when handling the machine, thus putting 
themselves and others at risk of severe injuries.

All work must be carried out by qualified per-
sons only.

NOTE!

After servicing, repair or cleaning please check 
whether all protective devices are mounted properly 
again, and no more tools are left inside the machine.
Damaged safety devices, machine parts and coun-
ters must be exchanged in accordance with the requi-
rements by an approved professional workshop.

Wear safety gloves!

DANGER!

Before all maintenance conversion and cleaning work 
on the exhaust system, the mains plug must be dis-
connected!

Summary of Contents for 5923902





















Reviews: