Transport, packaging, storage
SAA 902 | Version 1.03
11
Step 1: Remove the packaging and check the machine
for completeness.
Step 2: Attach the wheels and the two side panels to the
bottom of the chassis using the M8x40 square
head bolts and nuts (Fig.4).
Fig. 4: Mount wheels and side plate
Step 3: Screw the cross plate (4, Fig.5) tight with the
M8x10 square head screws.
Fig. 5: Mounting side panels
Step 4: Lay the preassembled unit on its side and screw
the two sides of the chassis together with the
M5x16 cheese head screws and M5 hex nut
(Fig.6).
Fig. 6: Mounting device unit
Step 5: Insert a hose fitting (17) over the suction hose (7)
as far as it will go to the suction connection of
the device and fix it with the hose clamp accor-
ding to fig. 7.
Fig. 7: Hose fitting
Step 6: Pull the chip bag (6) over the lower opening of
the plastic housing (13) so that it completely
closes the opening and secure it with the quick
release device (3) Fig. 8.
Fig. 8: Quick release device catch bag
Wear protective clothing!
DANGER!
Before all maintenance conversion and installation
work on the exhaust system, the mains plug must be
disconnected!