Holzstar 5922201, Operating Instructions Manual

Page: 12 / 20

12 SAA Series | Version 1.06
Maintenance and Service
9 Maintenance and Service
Daily Service
- Clean the machine after every use.
- Replace damaged security devices immediately.
Weekly Service
- Clean the machine regularly with a humid cloth and
some soft soap. Don´t use cleaning agents or sol
-
vents; these could damage the plastic parts of the
machine. Take care that no water can get into the
machine.
- Keep safety devices, air openings and engine cabi
-
net free of dust and dirt. Clean the machine with a
clean cloth or blow it out with air pressure at a low
pressure.
- A dust protection mask is to be worn while chan
-
ging and emptying the dust bag.
Monthly Service
- Control fixing bolts of the machine.
Service after 6 month
- Check electric security and safety devices
Tips and recommendations
The Chip Extraction Unit is constructed for efficient
operating. To guarantee a long life the servicing
aspects are to be carried out regularly.
ATTENTION!
Danger to life due to electrical
shock! !
Danger of live through electric shock by contact with
live power components!
- The Chip Extraction Unit may connected only from
Qualified electrician.
- Repairs on the electrical system must execute only
from Qualified electrician.
- Switch off the machine and pull the plug out before
starting any cleaning or maintenance work.
WARNING!
Risk from inadequately qualified
persons!
Inadequately qualified persons are unable to assess
the risks when handling the machine, thus putting
themselves and others at risk of severe injuries.
All work must be carried out by qualified persons
only.
NOTE!
After servicing, repair or cleaning please check
whether all protective devices are mounted properly
again, and no more tools are left inside the machine.
Damaged safety devices, machine parts and coun
-
ters must be exchanged in accordance with the requi
-
rements by an approved professional workshop.
Wear the safety gloves!