www.holzmann-maschinen.at
Form a habit of checking to see whether adjusting keys, wrench
-
es and other objects are removed from the machine before turn
-
ing it on.
It will do a better job when being used within its power range it
has been constructed for. Do not misuse the machine or parts of
it for jobs for which it was not intended.
Make sure your extension cord is in good condition. When using
an extension cord, be sure to use one with sufficient cross-sec
-
tion to carry the current your machine will draw. An undersized
cord will cause a drop in the line voltage resulting in power loss
and overheating.
Use only accesories matching with the machines specifications
and being suitable for the use with the machine. Especially im-
portant are the max. allowed revolution speeds for which the
accesory is allowed to be used. Use only Accesories whose max.
allowed revolution speed is higher than the max. speed of the
machine you intend them to use with.
Do not drill workpieces that are too small to be supported safely.
For smaller workpieces you should install a vice onto the working
table and support the workpiece with the vice.
SOME DUST CREATED by power sanding, sawing, grinding, drill-
ing and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead based paint
• crystalline silica from bricks and cement and other masonry
products, and
• arsenic and chromium from chemically-treated lumber.
• Your risk from those exposures varies, depending on how of
-
ten you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with ap-
proved safety equipment, such as those dust masks that are
specifically designed to filter out microscopic particles.
Finally obey all general working safety rules imperative when
operating a machine and follow all rules and regulations being
in power in your country regarding safety at work, accident pre-
vention, first aid, fire prevention.
DO NOT FORCE THE MACHINE
USE PROPER EXTENSION CORD
USE ONLY RECOMMENDED AND SAFE ACCESORIES
DRILL SAFETY
HAZARD FROM DUST
REMOVE ADJUSTING KEYS AND WRENCHES
WORK SAFETY RULES
Summary of Contents for SB 3116RHN
