Holzmann ED 750 FD, User Manual

Page: 33 / 64

ASSEM BLY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Seit e 3 3
METALLDREHMASCHINE / METAL TURNING LATHE ED 750FD
1 3 .4 Elect rical connect ion
13.4.1 Eart hing connect ion
A T T E N T I O N
W hen w ork ing on an ungrounded m achine:
Serious inj ury due t o elect ric shock in t he event of a m alfunct ion possible!
Therefore: appliance must be grounded and operated on a grounded outlet can be
The electrical connection of the machine is ready for operation on a grounded outlet!
If a plug is supplied, this must only be connected to a properly fitted and grounded electrical out-
let!
The plug (if supplied) must not be changed. If this does not fit or is defective, only a qualified
electrical engineer may modify or replace the plug!
The grounding conductor is green-yellow!
In the event of repair or replacement of the grounding conductor must not be connected to an
under voltage can!
Check with a qualified electrician or service that the grounding instructions are understood and
the machine is grounded!
A damaged cable must be replaced immediately!
1 3 .5 Before com m isioning

removing the mounted for the transportation and storage of corrosion inhibitors on the lathe .
We recommend this petroleum.

To clean, use any solvents, nitrocellulose thinner or other cleaning agents that might damage
the paint of the lathe. Please read the information and instructions of the detergent manufac-
turer .Lubricate all a bare machine parts with an acid-free lubricating oil.

Function of the movable and fixed parts of control

Lubricate the lathe from according to lubrication chart.

Check all screws for ease of movement .

Check that the fixing screws of the chuck are tight .

Clamp a workpiece in the lathe chuck , lathe or turning the clamping jaws of the chuck com-
pletely together before turning on the lathe.
13.5.1 Ret ract ion prior init ial
The retraction should be performed with the lowest screw speed. Let the machine at this speed
for about 1 hours walk . Check out irregularities , such as unusual noises , imbalances , etc. If
everything is in order, gradually increase the speed .